Welcome to an idea ...
Tap to focus
Tap for overview
to automate
the boring
we advise
we school
we assist
we maintain
we analyze
we research
we develop
we implement
we integrate
what we
can do
Gearbox & Belt
Sensors &
Electro-Motors &
Computer Aided

We know of gearboxes and belt systems. These systems are used to transfer power mechanically by means of gears acting on each other and wheels connected by a belt, respectively. For almost any application such systems exist and we know how to apply them in our designs.

We know how to design and implement pneumatic systems which use pressurized gases to transfer power. In general these systems use the air around us and therefore are both safe and clean. However, they are not very accurate in handling big loads.

We know how to design and implement hydraulic systems which use pressurized fluids to transfer power. In general these systems use oils as their medium. Hydraulic systems have to be built with care due to being prone to leaks, however, they are the systems of choice for handling big loads accurately.

We know how to design and build machines that can sense their environment as well as act on their environment. Although sensors and actuators can be of a purely mechanical nature, often electronics are involved as well.

We know of combustion engines. Such engines provide power through a rotary force and use fuels as a means to generate this power. Such engines are most often applied in mobile solutions that require a lot of power.

We know of electro-motors. Such motors can be used as actuators or can be used to provide power through a rotary force. Electro-motors come in many different forms, suitable to many different applications. They are the inverse of generators which are used to generate electric power from a mechanical source.

We know how to design machines using Computer Aided Design (CAD) tools such as SolidWorks and Pro-Engineer. Using these tools, the mechanical parts of a machine can be created and assembled, virtually, which allows for verification of designs before they are built.

The Analogue
The Digital
Sensors &

We know of analogue electronics, concerned with continuous signals. These signals represent information through varying voltages, currents, frequencies, etc. We know how to design, build and integrate systems that use such signals.

We know of digital electronics, concerned with discrete signals. These signals represent information by logic levels or ranges of voltages, currents, etc. We know how to design, build and integrate systems that use such signals.

We know how to process signals, both of a digital and analogue nature. We know how to convert digital to analogue signals and how to represent analogue signals digitally.

We know how to apply electronics to represent what can be sensed in the world or to operate devices that act on the world. To interact with their environment, sensors and actuators always require a mechanical component.

We know how to control and convert electric power. We know how to design and build power electronics as part of any larger design.

We know how to design and create electronic systems dedicated to certain tasks. Such systems could involve power electronics, analogue and digital systems, sensors and actuators, and could provide programmable components.

We know how to design and build machines that are used for computing algorithms. For many applications, suitable computing devices already exist, and we know how to apply these devices to the problem at hand.

Programming &
Biometrics &

We know how to communicate with machines. Hence, we can make them interact with each other. Making machines interact avoids the necessity of human intervention, which always poses a risk of error.

We know how to manage big data sets, how to collect all of that data, how to pre-process that data and how to organize storage for that data. As such, you can reflect on that data at any moment in the future.

We know how machines can and should interact with humans, custom to the task at hand, to improve user experience and to avoid error wherever possible.

We know how we can make machines, that sense and act on their environment, intelligent. We know how machines can learn from and remember what they have sensed. We can make them reason, plan and even take action, based on what they have learned.

We know of a multitude of programming languages to make machines compute. We know how to create optimal algorithms using these languages. Most programming languages have different purposes, specific to the task or the machine, and we know how to apply them.

We know how to identify humans by what makes them unique. We know how data can be protected and how services can be guaranteed to be provided to the right entities. We know how to make interactions through machines secure, whether or not by the application of biometrics.

We know how different systems can be structured for them to cooperate. We know how to integrate these systems such that many of the existing systems can be reused, replacing or adding only that what is strictly necessary.


Automation of the remanufacturing line for a mechatronic unit of a commercial vehicle transmission at a top-10 automotive OEM

This complex and long-term project involved a problem and feasibility analysis as to provide advise regarding effective automation of the remanufacturing line. After setting the goals of the project, by means of reverse-engineering, designs were made, custom to the problem at hand. Finally, these design lead to the construction of machines that were implemented in the remanufacturing line, integrated into corporate administrative systems and monitored until delivery.

Consulting on global remanufacturing projects of strategic value at a top-3 automotive OEM

This most interesting project required consulting on global remanufacturing projects of strategic value. We were involved in market research for determining suitable mechatronics, a partial reverse-engineering of these mechatronics, analysis of solutions towards the remanufacturing of the mechatronics and a feasibility analysis for different scenarios with varying estimated volumes.

Team server environment at a commercial vehicle service center

This challenging project involved an extensive study as to provide advise regarding the automation of administrative tasks. After determining the necessary tools to automate administration, a custom project manager, ticketing service, employee manager and schedule manager, integrated with an RFID based punch clock and access system, was designed, constructed and implemented. Finally, the team server was integrated into corporate administrative systems and monitored until delivery.

Renewal of the control electronics of a test bench for transmissions at a commercial vehicle service center

This rather complex project required analysis of the hardware currently in use, selection of new hardware suitable to the task, design and implementation of software for operation of the renewed components, design and implementation of hardware components, provision of an automation component for stand-alone operation and, finally, the testing, migration and monitoring of the new control system.

a new
Mobile Automated
Service Systems
please click here to review the website's terms and conditions

Terms and Conditions of the IDEA website

Welcome to the website of 'IDEA: Intelligent Design in Engineering Automation' (IDEA), below referred to as the IDEA website.

Please read the following terms and conditions carefully. Using the IDEA website is subject to these terms and conditions. These terms and conditions govern IDEA's relationship with you in regard to the IDEA website. If you disagree with any part of these terms and conditions, please do not use the IDEA website. If you do not think these terms and conditions are reasonable, please do not use the IDEA website.

The IDEA website is available only to individuals and entities who can form legally binding contracts under applicable law. Without limiting the foregoing, the IDEA website is not available to any person under the age of 18. If you do not qualify, please do not use the IDEA website. Note that IDEA may refuse to deal with anyone at any time, in our sole discretion.

The use of the IDEA website and any dispute arising out of such use is subject to the laws of the Kingdom of Belgium. In the event of any dispute all parties shall be bound exclusively by the jurisdiction of the courts of the Kingdom of Belgium.

Nothing in these terms and conditions exclude or limit any warranty implied by law that it would be unlawful to exclude or limit. If any provision in these terms and conditions is, or is found to be, unenforceable under applicable law, that will not affect the enforceability of the other provisions of these terms and conditions.

Provided “as is”

The IDEA website is a service intended for existing and potential clients of IDEA. The IDEA website is provided “as is”, without any representation, endorsement or warranty of any kind, express or implied.

IDEA does not warrant that the IDEA website or associated services, including e-mail services, will be constantly available, or available at all, nor does IDEA warrant that the information appearing on, or provided in conjunction with, the IDEA website, is complete, correct, true, accurate or non-misleading.


The content of the pages of the IDEA website is for your general information and use only. It is subject to change without notice. Neither we nor any third parties provide any warranties or guarantees as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on the IDEA website and this for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law. Furthermore, your use of any information or materials on the IDEA website is entirely at your own risk, for which we shall not be liable.

The IDEA website may include links to other websites. These links are provided for your convenience and/or to provide further information. They do not signify that we endorse the linked website(s), nor that we have any responsibility for the content of the linked website(s).

IDEA is not responsible for the way in which the IDEA website is used. The service is offered in good faith, as such IDEA cannot be held responsible for malicious use.

IDEA will not be liable to you (whether under the law of contact, the law of torts or otherwise) in relation to the contents of, or use of, or otherwise in connection with, the IDEA website: for any direct loss; for any indirect, special or consequential loss; or for any business losses, loss of revenue, income, profits or anticipated savings, loss of contracts or business relationships, loss of reputation or goodwill, or loss or corruption of information or data. These limitations of liability apply even if IDEA has been expressly advised of the potential loss.

You accept that, as a limited liability entity, IDEA has an interest in limiting the personal liability of its officers and employees. You agree that you will not bring any claim personally against IDEA officers or employees in respect of any losses you suffer in connection with the IDEA website.

Without prejudice to the foregoing paragraph, you agree that the limitations of warranties and liability set out in these terms and conditions will protect IDEA officers, employees, agents, subsidiaries, successors, assigns and sub-contractors as well as IDEA.


We are the sole owners of the information collected on this site. We will not sell or rent this information to anyone. When you send us an e-mail, we will use your information to respond to you, regarding the reason you contacted us. We will not share your information with any third party outside of our organization, other than as necessary to fulfill your request. Unless you ask us not to, we may contact you via email in the future to tell you about specials, new products or services.


The IDEA website contains materials which are either owned by IDEA or licensed to IDEA. These materials include, but are not limited to, the content, the information, the design, the layout, the look, the appearance and the graphics of the IDEA website.

All rights on the IDEA website and its materials are reserved, except that individual sections on the site may be downloaded or printed solely for personal and private use. It is not permitted to copy, transmit or reproduce any part of the IDEA website for any other purposes.

Unauthorized use of the IDEA website and its materials may give rise to claims for damages and/or be a criminal offense.

Complaints and Requests

Any complaints and/or requests about the IDEA website can be send to info@idea-pp.com. IDEA will do its best to handle your complaints and/or requests, however cannot give you any guarantees in regard to this.


Our terms and conditions are subject to change without notice. All updates will be posted on this page.


A special thanks to the Janne Aukia (http://www.simplicitydesign.fi/). He is the author of the open source JavaScript library zoomooz.js (http://jaukia.github.io/zoomooz/), that can be used to extend web pages with Prezi-like transitions in a straightforward way.

It made the IDEA website possible!


This document is the first version of the Terms and Conditions of the IDEA website, created on 27 August 2015.

Tap to